Prince Rupert Community Observatory

Prince Rupert is located within Ts’msyen Territory on the North Coast of British Columbia. Kxeen is the Ts'msyen name for Prince Rupert, although there are several interpretations of what Kxeen means the most widely accepted meaning is "foam on the waters" (Campbell, K, 2005, p.10). Today, Prince Rupert extends along the shores of Kxeen, however in the past there were two separate Ts'msyen villages. "The Gits'iis village was at one end, at Hays Cove and the Gitwilgyoots village was at the other end, near the ferry terminals and cannery" (Campbell, K, 2005, p. 15). People walked in between these two villages along the shoreline which they called Wil Hałyał Mediik, meaning "where the Grizzly Bear walks along the shore" (Campbell, K, 2005, p. 15). People still refer to this area of the Prince Rupert waterfront as Wil Hałyał Mediik today (Campbell, K, 2005, p. 15).

In March 2016 Ocean Networks Canada installed a community observatory within Ts’msyen Territory, on the west side of Digby Island near the Prince Rupert YPR airport. This observatory is equipped with a shore station that has a weather station and shore camera. The shore station is cabled to subsurface instruments that track and record local water quality, underwater sounds of marine mammals and vessels, and live stream video from an underwater camera. In addition, this location is equipped with a High Frequency (HF) RADAR (CODAR) system capable of measuring surface current speed and direction, as well as an Automatic Identification System (AIS) antenna to track large vessels in the region.

Ocean Networks Canada also installed instrumentation at a second location on the west side of Ridley Island. The installation has a second HF RADAR system that when triangulated with the Digby Island RADAR produces surface current maps that can extend out approximately 20 – 30kms.   An X-Band RADAR (WaMos) is also co-located at this site, producing a shorter range but higher resolution picture of wave heights, direction and period in addition to surface current maps. A second shore station hosts a weather station, a shore camera and AIS antenna at Ridley as well.

The network in Prince Rupert is expanding through the partnerships being established in the region and the collaborative engagement through the Port Environmental Stewardship Committee. The Prince Rupert Atlin Terminal Station is an example of the coordinated efforts to improve our understanding of the region. Ocean Networks Canada and the Prince Rupert Port Authority deployed the water quality sensor to add additional scientific data from the harbor. The parties look forward to working with others on continued long term data collection.

Prince Rupert Community Observatory Deployment Highlights. Watch on YouTube

Photo Album


Created with flickr slideshow.

Ridley Island Location

 
 

 

Digby Island Location

 
 
 
 
 
 
 

 

State of the Ocean

This continually updating plot shows the seasonal and annual changes in oxygen (O; purple), density (σ; blue), salinity (S; green), and temperature (T; red).
Save plot as PNG

Prince Rupert Atlin Terminal

 
 
 
 
 
 
 

 
 

Instrument Health

 

Ridley Island: All instruments are working properly and the data is reliable.

Digby Island: Instruments are working properly and the data is reliable, except the following:

  • Density, salinity and oxygen are compromised due to bio-fouling; the last reading is from October 21st, 2016.
  • The underwater camera is currently turned off due to bio-fouling.

​Prince Rupert Atlin Terminal: All instruments are working properly and the data is reliable.